HF40 THR RFID Reader

The RFID Reader HF40 THR is connected to the PC via a USB interface. The device is connected directly to the computer. The device with keyboard emulation can be connected to a running PC. The reader automatically detects the driver and subsequently starts installation.

The reading operation starts at the touch of a button. If identification was successful, the device confirms this by a signal and a flashing LED. The collected data are transferred to the PC via USB interface, and can be displayed and processed in any input field or text document.

The RFID reader is configured via the Set button. The individual settings can be changed at the touch of a button and can be visualized in ASCII or HEX format in a text document on the screen. If the device is used in combination with an emulated COM port, data transfer is carried out using an ASCII protocol.

Key Features

  • Mobile RFID reader
  • Replacement for barcode reader
  • Quick installation
  • Operation at the touch of a button
  • Emulated serial interface


Part Number THH-U2M-0R50-SM-0030
Output format ASCII or Hex
Dimensions approx. 165 x 110 x 80mm / 6.5 x 4.3 x 3.2 inches
Cable length Different cable types and lenghts are available
  (e.g. 3m or 5m / 118.11 inches or 196.85 inches)
Weight 220g / 7.1 ozs.
Housing material ABS
Protection class IP40
Operating temperature -25°C to 70°C / -13°F to 158°F
Storage temperature -40°C to 85°C / -40°F to 185°F
Voltage 5V +/- 5%
Current (active mode) 100 mA
Current (passive mode) 40 mA